Hoof Block Hardwood 12-pack

Get European beech hardwood blocks for Bovi-Bond, Septicare or other hoof-block adhesives. Grid pattern grip cuts keep them secure on abrasive walking surfaces. No need to remove as they wear off in 4-6 weeks. Length 112mm for elevating hoofs. Beware of leaving them too long, may need physical removal or risk tendon damage. Hard Wood BlocksGrid pattern grip cutsEuropean beech hardwood blocks What is different about Septicare' Unlike most hoof block systems on the market, Septicare is 1. Not temperature dependant. Septicare can be used in any weather without needing to be pre-warmed. 2. Septicare is not sensitive to moisture - there is no need to dry the hoof, and it can even be used in the wet! The other great advantage of Septicare is that it can be dispensed in any regular caulking gun. We do supply a very nice-quality Septicare gun, at a reasonable price, but your regular caulking gun will suffice. For block application, firstly fully treat the injured claw of the hoof to ensure best recovery. Then prepare the sole of the healthy claw, making it as flat as possible to maximise bond area. Apply Septicare adhesive generously to give glue depth of about 3mm (when spread over the bond area). Press the block lightly onto the claw, but not so much that the glue squeezes out. Position block carefully to ensure load-bearing is around the hoof wall and heel. After 15-30 seconds the hoof can be let down for load bearing.